|
|
|
|
Fixing and Finishing Your Flooring
|
|
| Under floor insulation |
| XPS Foam Underlay |
|
|
|
|
|
- 856 x 600 panel size
- 5mm thick reflective heat insulation boards
- 9.76m2 per pack (19 boards per pack)
- 20 db noise reduction
£25 per pack + vat
|
|
|
|
|
| Damp Proof Membrane |
| Visqueen EcoMembrane - 500g DPM - roll size 2m x 50m |
|
|
|
|
|
- Accredited by the British Board of Agrément (BBA: 94/3009)
- Manufactured using 100% recycled polythene
- Visqueen's low cost entry level brand
|
|
|
|
|
| Fixing Products |
Rewmar Adhesives
For the installation of solid and engineered flooring |
|
|
|
|
| Finishing Products |
|
After lots of sales and careful deliberation we recommend that the our solid oak
and engineered flooring is fitted unfinished. This enables the end user to choose
the colour of their choice. It will also let you colour other items, such as doors
and stairs, using the same finish. |
|
Below is a selection of waxes and oils that we recommend, but many others
are available. |
|
| Fiddes Floor Finishing Products |
|
|
|
|
|
| Fiddes Hard Wax Oil |
|
 |
| A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear. |
|
| Produces a quick drying, natural satin / matt water repellent, tread-fast finish that will not peel or flake. To maintain / renovate, simply wash, buff or re-apply, following the guidelines below. |
|
| Resistant to liquids and resistant to wear. |
|
| Please see the Fiddes web site for application instructions. |
|
Coverage: A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate.
Packaging: 250ml, 1 litre, 2.5 litre, 25 litre hjui |
|
|
|
Fiddes Tinted Hard Wax Oil
A new range of 9 transparent tinted Hard Wax Oils have been formulated, offering excellent depth of colour and clarity. Apply following guidelines above. A third and final coat of Clear Hard Wax Oil is advisable in areas subjected to heavy wear. |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
| American |
|
Antique |
|
Dark Oak |
|
English |
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
| Medium Oak |
|
Whiskey |
|
White |
|
Oak Lightening |
|
|
| Oak Lightening is a recently added colour which was produced for the increasing demand to keep the natural colour of the oak. |
|
| Samples shown are representative of final finish. Always check colour before use and ensure contents are stirred regularly before and during application. |
|
|
| Rustins Floor Finishes |
|
|
|
| Rustins Floor Oil |
|
 |
| A mixture of natural vegetable oils and resins which improves the colour of bare wood. Wood tone will become richer when oil is applied. |
|
| Can be applied to all types of interior wooden floors, including parquet, woodblock and floorboards. |
|
| Pack size: 1 litre and 5 litre |
|
| Allow 4-8 hours between coats, depending on temperature and humidity. Minimum of 3 coats recommended. |
|
| Please see below or go to the Rustins web site for details of other products. |
|
|
|
|
|
|
| Other Rustins Products |
|
|
|
|
|
| Multi-purpose Floor Shine |
|
|
|
|
|
 |
|
Rustins floor shines are specially formulated for use on our oak flooring. Laminated Floor Shine is for use on engineered oak flooring, whilst Multi-Purpose Floor Shine can be used on our solid oak flooring as well as other wood, cork, vinyl and lino flooring. Low odour, easy application and quick-drying. Leaves a brilliant shine without buffing. Drying time 10-20 minutes. Leave for 24 hours before re-coating. Wash equipment in water.
Floor Shine - Wood: 1 litre
|
|
|
|
| Acrylic Floor Coating - Gloss and Satin |
|
|
|
|
|
 |
|
Non-toxic, quick drying, low odour, completely clear and non-yellowing. Resistant to water, alcohol, white spirit and similar solvents. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Can be applied to wood, cork, MDF, concrete and unsealed terracotta and quarry tiles. Available in Gloss and Satin finish. Clean brushes in water.
Acry.Floor-Gloss 1 litre
Acry.Floor-Gloss 2.5 litres
Acry.Floor-Gloss 5 litres
Acry.Floor-Satin 1 litre
Acry.Floor-Satin 2.5 litres
Acry.Floor-Satin 5 litres
|
|
|
|
| Multipurpose Floor Finish |
|
|
|
|
|
 |
|
Apply on laminate, pre-coated veneered and wood floors, where minimum preparation is required. Quick drying, low odour, completely clear and non-yellowing. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Available in Satin finish. Clean brushes in water.
Multipurpose Floor Finish 1Litre
Multipurpose Floor Finish 2.5Litre
|
|
|
|
| Floor Oil |
|
|
|
|
|
 |
|
A mixture of natural vegetable oils and resins which improves the colour of bare wood. Wood tone will become richer when oil is applied. Allow 4-8 hours between coats, depending on temperature and humidity. Minimum of 3 coats recommended. Can be applied to all types of interior wooden floors, including parquet, woodblock and floorboards.
Floor Oil 1 litre
Floor Oil 5 litres
|
|
|
|
| Laminated Floor Shine |
|
|
|
|
|
 |
|
Rustins floor shines are specially formulated for use on flooring. Laminated Floor Shine is for use on laminated floors, whilst Multi-Purpose Floor Shine can be used on wood, cork, vinyl and lino flooring. Low odour, easy application and quick-drying. Leaves a brilliant shine without buffing. Drying time 10-20 minutes. Leave for 24 hours before re-coating. Wash equipment in water.
Floor Shine - Lamin. 1litre
|
|
|
|
| Plastic Floor Coating |
|
|
|
|
|
 |
|
A two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1-11/2 hours, floor can be used 2 hours after last coat has been applied. Available in Gloss and Satin finish.
Plastic Floor Coating - Gloss Trade Pack 4 litres
Plastic Floor Coating - Gloss 4 litres
Plastic Floor Coating - Gloss 1 litre
Plastic Floor Coating - Satin 1 litre
Plastic Floor Coating - Satin 4 litres
Plastic Floor Coating - Satin Trade Pack 4 litres
|
|
|
|
| Hardener |
|
|
|
|
|
 |
|
For use with Plastic Floor Coating
Hardener only - F 250ml
Hardener only - F 63ml
|
|
|
|
| Plastic Coating Thinners |
|
|
|
|
|
 |
|
Plastic Coating Thinners and Brush Cleaner
Plastic Coating Thinners 250ml.
Plastic Coating Thinners 500ml
|
|
|
|
| Polyurethane Floor Sealer |
|
|
|
|
|
 |
|
A heavy bodied, pale coloured, solvent based polyurethane which gives a tough and durable finish. Resistant to water, alcohol, white spirit and similar solvents. Drying time is 4-6 hours. Can be applied to wood, cork, MDF and old concrete floors. Can be applied to already coated flooring without sanding as long as the surface is clean and free from wax. Available in Gloss and Satin finish.
Poly. Floor Seal 1 litre
Poly. Floor Seal 2.5 litres
Poly. Floor Seal 5 litres
Poly.Fl.Seal Satin 1 litre
Poly.Fl.Seal Satin 2.5 litres
Poly.Fl.Seal Satin 5 litres
|
|
|
|
|
